How To Do Netgear EX6120 Setup In Extender Mode?

Netgear EX6120 is a device that can be set up in extender mode as well as access point mode. Today, in this article we are going to elaborate how to do the setup in extender mode. Netgear EX6120 Setup will not take too much time. Anyone can do the setup with a little knowledge about the process. With the device you can extend your current network and eliminate WiFi dead zones from your space. Our guidance will surely help you with the setup of the Netgear EX6120 device. Read out the further given content of this page to know in detail.

Netgear EX6120 Setup Process

Setting up the device in extender mode can be done through two ways. First method is WPS which is much easier than the other (web) method. Web based Netgear EX6120 Setup will take a little longer time than the WPS method but it allows you to enhance security of the network. Check out the step by step guide to follow in both the methods.

WPS Setup of EX6120

WPS based setup of your netgear EX6120 is quick, easy & straight. Anyone can do it within 10 minutes. Using this method has a drawback, you can’t set a separate SSID & password for your extended network. The same SSID with _EXT will be created automatically as the setup completes. Also you have to use the same password as your existing network has to use the new created network. Steps to proceed with WPS based method includes:

  • Begin the process by powering your new netgear EX6120 device.
  • Thereafter check its LED and when it stables then proceed the setup by pressing WPS button.
  • Hold it for 6 seconds and then release it to move ahead.
  • Next you should press the WPS on your home network device (host).
  • This whole process should be completed within 2 minutes to avoid failure.
  • Wait and monitor the device till its LED turns solid green in color.
  • In case the device LED doesn’t turn solid green or display any other color it signifies the process fails.

Web Setup of EX6120

  • To begin the Netgear EX6120 Setup using this method requires a computer or laptop device with an updated web browser version.
  • Secondly, you need to turn the power on by connecting the Netgear EX6120 device to the power.
  • Once the device power is on you need to start configuring it by connecting a device with its network.
  • Thereafter you should open the web browser you have in the device and then search for mywifiext.net
  • Access the portal and search for new extender setup option to proceed with Netgear EX6120 Setup
  • Move further by following the on screen guide and create a netgear account
  • Choose the “WiFi range extender” option from the opened screen.
  • Proceed with selecting your home network SSID and then provide the password as well.
  • Choose the connect option from the screen to complete the setup process.
  • Create a SSID for your new extender device & a password too.
  • You may use the similar SSID & password as your current network has.
  • Furthermore, we advised to keep a secured password to protect any unauthorized access.