Reshape Your Home Network With Netgear EX6200 Setup

Muddled between different extender devices? Don’t know which is perfect to reshape your home networking system? Thinking of setting up Netgear Ex6200. You came to the right page then. Here we furnish detailed information about the Netgear EX6200 Setup. Furthermore we also mentioned the specifications of the device which will help you understand how the device will stand out best to reshape your home network. Hence, you can accumulate the details from this article prior to making a decision. Also, this article will help in setting up netgear extender device.

Netgear EX6200 Specifications

Netgear EX6200 is a range extender device that helps in extending the network coverage of your existing router device. With the setup of the device you will get wireless network speed up to 1.2 Gbps. It is a dual band wireless networking device featured with 5 ethernet ports for wired connection. Also has two external antennas for network coverage. Netgear EX6200 setup is not a daunting task as it support WPS button based setup. You can add the device by pushing a button within a few minutes.

Netgear EX6200 Setup Process

Setting up Netgear EX6200 is a modest process that anyone can follow. Configure your netgear extender device by using the WPS based setup or using web interface. Step by step instructions to follow via both the methods are specified in the further section.

WPS Setup

WPS setup requires a netgear ex6200 device, power outlet, power adapter and host router device with working internet connection & WPS enabled.

  • Embark on the setup process by placing the device next to the host router.
  • Thereafter powering the device & letting it boot up properly.
  • Now compress the WPS button of the host router.
  • Retain the buttons around 10 seconds and then renounce it.
  • Within two minutes do the same with extender WPS.
  • Lastly, monitor the LED of the extender device.

Note: If LED turns into solid green in color means the connection is successful.

Web Setup

Web setup requires a netgear ex6200 device, power outlet, power adapter, ethernet cable, computer/ laptop and host router device with working internet connection.

  • Embark on the Netgear EX6200 setup process by placing the device next to the host router.
  • Thereafter boot up the device using the power adapter and wait till it properly starts.
  • Now establish a link between your computer/ laptop device & netgear extender using ethernet cable.
  • Also you can establish a link by accessing the wireless network of the netgear extender.
  • Henceforth, launch a browser to access the www.mywifiext.net portal.
  • Access the site & commence process by selecting “NEW EXTENDER SETUP”
  • Follow the screen prompts and configure all the important settings.
  • Netgear installation assistant will guide you with the whole setup process.
  • After linking your device with the host router network by adding its SSID and password make sure to change the default details of your extender network.
  • Lastly, check for the firmware update & finish the setup by relocating your extender device.

In case you get stuck anywhere during configuration, take help from our technicians.