Netgear EX6400 Setup
Extender devices are used by several users to extend their home network range and speed. Netgear EX6400 range extender is a perfect option to transform your home network into a powerful WiFi system. The device offers up to 1.9Gbps speed. It is a dual band frequency device. You can configure the device very easily with WPS & web based netgear installation assistant. If you feel the setup process is formidable and need technical expertise then it is not true at all. Just check out this resource and follow the Netgear EX6400 Setup instructions we have provided. With our guide you can easily configure the device and boost your home network.
EX6400 Range Extender Overview
To create your home network a dependable one, you just need to connect Netgear EX6400 WiFi Range Extender in your existing WiFi network system. Netgear EX6400 is a dual-band WiFi mesh extenders that has internal antennas to extend the signals. It is a compact wall plug device. On the front of the device you will be able to see four LEDs. These LEDs indicates
- Router Link LED- Connection between the extender and the router or access point.
- Client Link LED- Connection between the extender and your WiFi enabled computer or mobile device.
- Power LED- Connection between power and extender device.
- WPS LED- WiFi security is enabled or disabled.
On the side panel of the extender device you’ll find buttons including:
- Power button- To turn on or off power
- Reset button- To restore the settings back to factory settings.
- WPS button- To establish connection with the router using WPS.
- Mode switch button- To choose between range extender mode or access point mode.
In addition to this you’ll find an ethernet port on the device bottom as well. The Ethernet port will help to connect LAN devices with the extender.
Netgear EX6400 Setup Process In Range Extender Mode
You can easily complete Netgear EX6400 Setup with the given simple steps. These instructions are specially designed to inform our readers how you can initiate the setup without any technical experience. Prior to choose between the methods you should follow the given steps:
- Initially, you need to unpack the device and take out the device.
- Thereafter, connect it to the power outlet closer to the host router device.
- Afterwards, use a device likewise mobile, laptop, computer or tablet and then connect it to the extender network.
- Once connected then you can move ahead to follow a Web based process.
- To move with the WPS process you don’t need a client device. Although you need to locate the WPS button on the router device.
- Before commencing with any of the methods, must turn the Mode switch button to range extender mode.
WPS Method
The WPS method to connect your Netgear EX6400 with an existing home router is the easiest method as compared to the Web method. You have to follow the given steps to configure your device with this method:
- Firstly, press the WPS button on the Netgear EX6400 range extender device.
- Thereafter monitor the WPS LED, it will start blinking.
- Now, press the WPS button on the home router device in between two minutes.
- Afterwards, sit back and wait till the device reboot itself.
- Once it starts again, check out the WPS LED. If it turns green then your setup process completes successfully.
After successful completion of the Netgear EX6400 Setup, you need to relocate the extender device. Furthermore, test the new network speed and coverage by using a WiFi enabled device. Go to the WiFi settings and connect the device to the new network. Browse websites, watch videos and play online games to verify the speed.
Web Method
- To begin with the Web method you need to open a web browser in the client device.
- Next you should browse “http://www.mywifiext.net/” web page
- NETGEAR installation assistant displays on the screen.
- Follow the guide as shown on the screen to complete Netgear EX6400 Setup.
- Select your existing network SSID and provide its password as well.
- Thereafter you have to choose your existing home network name.
- Provide the password of your home network, so the device can be connected.
- Complete the EX6400 Setup and then relocate it to another place.
- After relocating the device, test your new network. Just connect a device to the network and use the internet.
Note: To optimize the network, you should look for a place in the midway to keep your range extender. Router LED on the extender device will guide you where exactly to put your device. In case the LED lightens up green or amber color, it signifies that the signal strength is good. You can keep the extender on the place you plugged it in. If your router LED turns red in color then it shows a weak signal, you need to move the device a bit closer to the host network device.