How To Easily Conduct Netgear EX7300 Setup ?

Netgear’s EX7300 wifi range extender is worth spending every penny. The reasons are numerous like seamless roaming, FastLane technology, availability of Ethernet port, dual-frequency bands and much more. But to grab all these benefits, errorless performance of Netgear EX7300 setup process is crucial. The process is simple and doesn’t require assistance from experts but definitely the right guidance. So in this blog-post we’ll help you with the installation of the EX7300 signal booster. With no more delay, let’s start with finding out the requirements for the setup. 

Pre-Installation Requirements 

For Netgear EX7300 setup you definitely require all these below mentioned components:

  • First is the router. 
  • Next up, details of the current network whose wireless reach you want to extend. 
  • A smart device. You can use a computer, laptop, smartphone and iPad as well. 
  • Thereafter, for activation of EX7300 signal repeater, you must have access to the electrical outlet. 
  • Lastly, you require accurate login credentials. 

Initiating The Setup Process

The Netgear EX7300 setup can be done in two ways. One is using the WPS button and the other makes use of the web browser. We’ll list the process for both options. So you can select the easier one.

✓ Power On The EX7300 Device 

Firstly, plug the EX7300 signal booster into a power socket. This socket must be in close proximity to the router. Now power it on. At first, the power sign will flutter. But eventually within a few minutes it will go stable. This means you can now move to the next Netgear EX7300 setup step. 

  • Using WPS Method 

If you choose to finish the setup using WPS method then follow these steps:

 

✓ Press the EX7300’s WPS button. Wait for its indicator to start flickering. 

✓ Next, press the router’s Wifi protected setup button. 

✓ Now wait for the indicators of both gadgets to stop fluttering. As they stop and turn stable, your setup is done. 

  • Using Internet Browser 

If you choose to do the Netgear EX7300 setup using internet browser then these are the steps you need to follow:

✓ First grab your smart device. Enable its wifi. From all networks, select Netgear _EXT network name. Tap on Connect. 

✓ On the exact same device, now open the internet browser. You can use any browser from Chrome to edge. 

✓ Load mywifiext.net in the URL blank. With that tap the Enter key.

✓ Now fill in the login information. Users who haven’t modified the same can use:

  • Username:admin
  • Password: password 

✓ After you click on Login, the interface will show up the list of all available nearby networks. From this list find your router’s identity. Tap on it. Following it, input the security key. Finally, click on “Connect” and do other required customizations. With this the Netgear EX7300 setup via internet browser is all done. 

✓ Reposition The EX7300

Once the setup is all done, for seamless and uninterrupted networking experience, you must plot the extender in between the router and the area with wifi dead spots. Additionally, plot the device in an open area away from all metal as well as electrical items. Moreover do not plot it inside any box, behind furniture, in a corner or directly on the floor. Always choose a spot that is high in elevation. 

✓ Test The Connectivity 

Finally, after strategic repositioning of the Netgear EX7300 setup you can now pair your device to the new network. On it, stream any high definition content. Now leave the device in the area where you previously had problems. Come to the EX7300 and check if all the smart indicators are lit green or not. If yes then it means the pairing is done well and the setup is successful. If not, then you must reposition the device again. If the router link indicator is red then push the device near to the router. Whereas, if the device link indicator is green, then drag it near to the wifi dead spot.