How To Install Netgear Extender?

Installing a Netgear extender is one of the simplest and most effective solutions, If you are struggling with WiFi dead zones at home or in your office. A WiFi extender works by receiving the wireless signal from your router device. After that the device rebroadcasts signals to boost it further across your space. Whether you are a new person or a tech expert, learning How To Install Netgear Extender? is a quick and hassle-free process. Below, we have put together a clear step by step guide to help our readers to perform the setup efficiently.

Installation

Do the installation of the device hardware first prior by following the steps here. After installation of the hardware you have to proceed with the configuration to properly install the device to your home network.  

  • To begin the installation, unbox your Netgear extender and plug it into a power outlet located near your main WiFi router. 
  • Ensure the power outlet is not too far from the extender placement and also not from the router device as the extender needs a strong WiFi signal during setup. 
  • Once powered on, stay for the LED lights to stabilise. Most of the Netgear extenders have a Power LED that turns green when the device is ready. 
  • Do not place the extender behind walls, inside closets, or near metallic objects as these can intrude with signal transmission.

Before stepping further, make sure you know your router’s network name (SSID) and WiFi password. You will need these credentials during setup. Once the extender is powered up, you can choose between Netgear Extender Setup via WPS or Netgear Extender Setup via Web, depending on your convenience. 

Netgear Extender Setup via WPS

The WPS system is the fastest way to configure your extender. By follow these steps you will understand How To Install Netgear Extender easily

  • To start, press the WPS button located on your Netgear extender. Within two twinkles, press the WPS button on your main router. 
  • You’ll notice the WPS LED on the extender blinking. 
  • Once the light turns solid green, it confirms a successful connection.

Connect your device to this network using the same WiFi password as your main router. However, repeat the same WPS process for the 5 GHz band, If you have a dual- band extender. Once configured, open the extender and place it in between your router and the area with weak signal content.

Netgear Extender Setup via Web

The WPS system is the fastest way to configure your extender. By follow these steps you will understand How To Install Netgear Extender easily. If your router does not support WPS or you prefer manual configuration. Then read the next segment carefully.

  • First, connect your smartphone, tablet, or laptop to the extender’s dereliction WiFi network called “ NETGEAR_EXT ”.
  • Open a web cybersurfer and enter mywifiext.net in the address bar. This will deflect you to the Netgear setup gate.
  • You will be asked to enter the password and username to get access to the admin account for managing the extender. 
  • After that you need to change the default credentials and step forward as guided by the setup wizard. 
  • Select your router’s SSID from the list and enter the WiFi password. 
  • Next, assign a new name for your extended network. 
  • Save the settings and let the extender reboot. 
  • Once the LEDs stabilise, connect your device to the extended network to enjoy boosted content.

Connect Us

Still doubtful How To Install Netgear Extender? or facing issues like blinking LEDs, no internet, or login issues? Don’t worry our expert support team is available to help you. Call us now!