How To Set Up Netgear Wifi Extender ?

Does your internet connection keep dropping whenever you move a little away from the router? If yes, then you definitely need Netgear wifi extender. This device can easily fill up all the gaps and can offer better wifi speeds, seamless connectivity throughout the area. The Netgear range extender works with the existing router. Thus it takes away the signals from it, then it strengthens as well as multiples these signals into huge numbers and finally it broadcasts these signals into each direction so that there is no place left where you aren’t able to enjoy internet connectivity. This guide will show you how to set up Netgear wifi extender quickly. It’s a simple process. Therefore, you do not need to be a tech expert. So let’s dive straight into it.

The Easiest Way: Using WPS Button

The WPS method is the fastest way to connect your extender. It works if your main router has a WPS button. The steps for it are as follows:

Bring the extender as close as possible to the router.
Now with its power wire, turn it on.
Wait for a couple of seconds so that the extender is able to complete its booting process.
Once the power light goes steady, locate and press the WPS button on the router first.
Thereafter, without wasting even a single second, locate and push the Netgear extender’s WPS button as well.
Now the WPS indicator of the router as well as of the extender will start flickering. This means the WPS function has been activated.
Finally, you just have to wait for the indicator lights to turn steady white or green. As it suggests, successful syncing of the router and the extender.
At last, unplug the extender and place it in the middle of the router and the area where your wifi signals drops. Once placed, repower the extender and check the connectivity by pairing your device to it. If the signals aren’t proper, then bring the extender a little closer to the wifi dead spot.

With this we hope you got the answer to the question: How To Set Up Netgear Wifi Extender? But if you need an alternative then keep on reading.

Method 2: Using Nighthawk App

If your router doesn’t have a WPS button, or if you prefer a more detailed setup then you can pick the Netgear Nighthawk app setup method. The steps for it are quite simple.

First of all, take a smart device. It can be anything from laptop, computer to an iPad.
On it download the Nighthawk app. Meanwhile the installation is going on, you can jump on the next step.
So plot the range extender in an area where your router’s signals drop to 50 percent. Now with the help of extender’s power adapter, activate the extender. Let it boot up properly. The booting process can take up some time, so you do not need to rush.
Thereafter, launch the Nighthawk app. New users, sign in and the existing users login into the app.
As you do the above steps properly, the Nighthawk app will automatically start providing you setup prompts just after you hit on the Setup A New Extender option. So you have to follow the app’s instructions one by one for a successful setup.

Note: While manually conducting the Netgear extender setup, you are prompted to fill in the router’s password. But sometimes the users do not know the accurate details. So in that case you have to factory reset the router and then reassign it a new password. Only then you’ll be able to pair the router to the extender manually.

If you still have queries regarding How to setup Netgear wifi extender, then you must connect to our experts.