Netgear AC1750 Setup: Step By Step Configuration

Netgear AC1750 is a range extender device offered by Netgear, a leading networking hardware provider. It is a dual band device that offers a combined speed of 1750 Mbps. The device is meant to boost your existing network coverage. Netgear AC1750 setup is very easy by using the nighthawk app. Furthermore you can add the device to your existing home or office network with a simple WPS button push process. Not only this, you can also configure the AC1750 range extender device via web based setup. The matter of fact is to perform the setup you need complete knowledge of the process from installation of hardware to connect it with the current router device. Read the step by step breakdown of the process and configure your range extender device.

Installation of Netgear AC1750

Hardware installation of netgear AC1750 is breaked by us into simple steps as specified here:

  • First of all unpack the device very carefully and then check the Access Point/Extender switch. 
  • Push the button to the extender side and then place the extender closer to the host router device. 
  • Use the adapter of the netgear AC1750 device and connect it to the power port on the device. 
  • Also connect the adapter to the electric switch and wait till the device LED turns to green from amber color.

Setup of Netgear AC1750

Prior to beginning the Netgear AC1750 setup process, you need to verify you have all the required items or not. Requirement for the setup via web method is a computer/ laptop device, host router with internet, ethernet cable (for wired connection), SSID & password of host router network and netgear AC1750 device properly installed. Now you can initiate the setup steps as specified:

  • Connect your computer/ laptop with a netgear AC1750 device using ethernet cable or by accessing the wifi settings.
  • Launch a web browser in your computer/ laptop device to access mywifiext.net setup page. 
  • Search for the address and netgear installation assistant will display. 
  • Follow the netgear installation assistant guide to add the extender device and connect it with the router. 
  • Enter the router’s SSID & password on the screen and click on connect option. 
  • Configure admin security settings and create a new network name along with password for your netgear extender’s network. 
  • Check for the firmware update and after configuring all the required settings finish the Netgear AC1750 setup by hit on apply option. 
  • Next you need to relocate the device to an adequate location so the device can boost the network where you were facing trouble.
  • Check the new network using a wifi enabled device and verify the coverage and speed.

Connect Us

You need to connect us if you encounter any issue with the Netgear AC1750 setup process. The above said clear instructions will help you. Follow them as mentioned and do not skip any step. Yet if you encounter trouble then call our tech team on the below specified contact number. Our tech team will help you in understanding the problem and provide an effective solution. Call Now!