Netgear EX3110 Setup: Extend Your Network

Is your single router device not enough for your network requirements? Are you in search of a device that extends your router signals and gives you a better network. If so then Netgear EX3110 will be the perfect option for you. It is a dual band device that offers high speed internet up to 750 mbps. With the addition of this networking device to your current networking system you will be able to boost your network easily. Confused how to set up the device? No worries by following the further specified step by step guide on Netgear EX3110 Setup you can complete the configuration of your device. 

Install The Device

You can initiate the Netgear EX3110 Setup with the installation of the device hardware. Proper installation of hardware devices is necessary to avoid any error in the configuration. You have to take the device and plug it in a wall socket closer to your router placement. For the initial setup you need proximity there after you can relocate your device to another location to boost the performance. Once the placement and power is done you have to wait until your device LED turns stable after that you can proceed with setup. 

Configure The Device

Start the Netgear EX3110 Setup by using a client device. Make sure the client device has an updated version of the web browser. You can use any web browser including Mozilla Firefox Google Chrome Microsoft edge or any other. Check out the steps you have to proceed: 

  • First of all you have to connect your client device with the Netgear extender network using the standard network name and password or via ethernet cable. 
  • Moving ahead you need to launch the web browser and access the setup page by specifying the IP address or web address in the address bar. 
  • As the setup page appears you have to get the access of the dashboard by entering the standard login credentials. 
  • Submit the information and then choose the language to start the setup. 
  • Connect the extender with your router device by choosing the network name of your router. 
  • Specify the password of your router network on the screen when asked. 
  • Make other additional configurations including firmware update, change of network name, enhance security and more per your need.
  • Submit the changes and let the device apply it. Meanwhile the device will reboot itself. 
  • Now you can relocate your device and test the network speed and coverage. 

Connect Us

Yet face difficulty in completing the Netgear EX3110 Setup? Even after following the above specified steps you are not able to do the configuration by yourself? If so then our technical team is here to assist. You can contact our team on the below specified number and one of our representatives will talk to you. Let the representative know the trouble you are facing and get the solution to the issue instantly. Follow the instructions of the expert and get your network set up properly.