Netgear EX6100 Setup: Step By Step Process

Netgear EX6100 is a perfect range Extender device to expand the network coverage. For all those network users who are facing WiFi dead zones or no network zone with their current network, adding Netgear EX6100 is a good solution. You can add this device along with your router device to extend its coverage. Adding Netgear ex 6100 is not a difficult task at all if you are aware of the Netgear EX6100 Setup process. You can easily complete the setup of the device by following the guide we provide here. Below mentioned steps of the setup process is breaked in such a way so that you are able to understand the process and do the configuration by yourself. 

Place The Extender

Placement of the extended device is the first step of the extender setup process. Without adequate placement you are not able to proceed with the setup process ahead. Make sure you have kept the device closer to your router or AP device with which you desire to connect it. 

Power Up The Device

Now you have to move forward in the Netgear EX6100 Setup process and turn up your device. To turn up your device you have to connect it with a power source. After connecting the device with the power source you have to turn on the power supply and wait for the device to start properly. 

Connect To Extender Network

The next step of the process is connecting the client device with the extender network in which you are going to access the web interface of the extender. For this connection you can use the standard network name and password as specified on the device label. 

Launch The Web Browser

Step forward and launch a web browser. You can use Google Chrome Mozilla Firefox or any other web browser to access the setup page of Netgear ex6100. Be careful you just have to use the browser which is updated. An updated version browser might restrict the access. 

Access Setup Page

Now it’s time to reach Netgear EX6100 Setup page and for that you have to rush to the URL bar and specify mywifiext.net. As you specify the web address click on enter and the page will display on the screen. By entering the standard login credentials you can get access to the setup page.

Configure Device

Start configuring your device with the connection to the host network. You have to choose the network name of your host network device and then enter its password. Thereafter you have to create a separate SSID and password for your extended network. Also don’t forget to update the device firmware and do additional advance settings. Submit the changes made by you by pressing the submit option. 

Relocate Extender & Test Network

Now you can relocate your extended device to another location. Free location is needed to boost your network coverage. While you are locating make sure the device is kept within the range of the host network. 

Connect Us

Hope the above specified steps on Netgear EX6100 Setup process is clear to you. In case you encounter any problem then our technical experts are here to help. You just need to give us a call on the below provided number.