Netgear EX6200 Setup
Is your existing home network creating trouble for you? Are you facing issues such as no signal zone, weak signal area, no connectivity? Netgear EX6200 is a perfect solution for you. It is a range extender device that can eliminate dead zones or weak signal or no signal areas. This device will extend your home router’s signals and you can enjoy seamless connectivity. With the Netgear EX6200 Setup you can turn your home into a WiFi heaven. Setup process is so far very easy. You can do it by yourself without any tech expertise within a few minutes. Worried how is it possible? Don’t worry we are here for you, just move further as we guided below. Our Step by step guide will help you to complete the configuration with no hassel.
Netgear EX6200 Overview
Prior to jumping into Netgear EX6200 Setup, you should know the device better. Understanding the features of the device will help you in using it in a better possible way.
Unpack the Device
With the Netgear EX6200 extender device, you’ll also get a power adapter, a snap on stand, four rubber feets and a user guide. Carefully unpack the extender device and take out your EX6200 device.
Top & Front Panel
On the top side of the extender device you’ll see different LED Lights. These LEDs include 2.4 GHz Link Rate LED, 5 GHz Link Rate LED, Device to Extender LED, LAN LEDs, and USB LED. Each LED has a different role which you can understand more clearly while reading the Netgear EX6200 Setup. In addition to the LEDs on the front panel of the device you’ll find a USB port.
Rear Panel
On the rear panel of the device you’ll find a WPS button along with five ethernet ports, two preinstalled 5dBi antennas, restore factory settings button, power button and power connector port.
Installation of Netgear EX6200
You can easily install the Netgear EX6200 AC1200 range extender device. Just follow the given steps and complete the installation.
- Firstly you need to tighten the antenna by moving it in a clockwise direction.
- Now decide the way you wish to keep your extender device, if you want to keep it horizontally then attach the rubber feets otherwise attach the stand.
- Thereafter find a proper location to keep your extender device. Also must remember to keep it next to the main host router device during the setup process. Proximity is required only for the setup. Afterwards you can move it to another place.
- Plug-in the power adapter in the power port on the back of the extender device.
- Then attach the power plug in the power outlet and turn on the power.
- Also turn on the power from the power button on the extender device.
Once all is done, your hardware installation process is complete, now you can set up your range extender device.
Step By Step Netgear EX6200 Setup In Extender Mode
You can connect your Netgear EX6200 with your home network with two methods. Both the methods are easy but the WPS method is quicker also as compared to the web one. Just checkout the steps to follow via both the methods to do configuration.
Connect Using WPS
To connect via WPS method you just need a router device with WPS button. If your router supports WPS then you can configure your range extender in just 10 minutes. In the process you just need to press the WPS button on the range extender first. Thereafter you need to press the WPS on the router device with no time waste within two minutes. That’s it now, wait and let the process complete.
Connect Using Web
To connect by using a web method, you need a little more time. This involves following steps:
- Use Laptop, computer or mobile device that enables WiFi.
- Connect to the netgear extender network by browsing the WiFi settings.
- Thereafter go to a web browser of your choice and search for “http://www.mywifiext.net”
- Login page will open on the screen. Choose “new extender device setup”.
- Click on the next option and choose the WiFi Range Extender option
- Netgear Installation assistant will readily assist you in the process.
- Now just follow the on screen guide to move ahead and complete the configuration.
- Also don’t forget to change your SSID & Password as keeping default details can be a threat for your network.
- Afterwards you can relocate the device to enhance its performance.
Step By Step Netgear EX6200 Setup In Access Point Mode
- To use the device in access point mode, you need an ethernet cable to connect the device with the main host device.
- Insert the cable in the ethernet port of your router device and other end in the extender device.
- Use Laptop, computer or mobile device and connect to the netgear extender network by browsing the WiFi settings.
- Thereafter go to a web browser, search for “http://www.mywifiext.net” and the login page will open on the screen.
- If you are using the web page for the first time, create your account.
- Click on the next option and choose the Access Point option from there.
- Follow on screen instructions and complete the setup.