Netgear EX7500 Setup
For day to day operations, a solid network is required as most of the activities nowadays are associated with the internet whether personal or professional. Most of us are struggling with their existing network performance. Netgear EX7500 is the perfect device to add in your home network to get rid of hindrance. You can easily configure the device by yourself without even any tech expertise. Don’t worry, we are available to help with the Netgear EX7500 setup. Check out this resource up to the end to get a step by step guide. In addition to this you’ll get several other important details about the device.
Netgear EX7500 Overview
Netgear EX7500 is a tri band mesh WiFi extender device. The device, also known as Nighthawk X4S, can deliver 400Mbps @2.4GHz – 256QAM, 866Mbps @5GHz – 256QAM and 866Mbps @5GHz – 256QAM network speed. With the Netgear EX7500 setup you can boost your existing network performance 100% as compared to typical extenders. This device creates a dedicated wireless link to your WiFi and eliminates dead zones or dropped connection problems. When it comes to the design of the device, it is a compact wall plug device with LEDs on front and buttons on the side panel. You’ll see five LEDs in front that indicate power, router connection, 2.4 GHz WiFi client connection, 5 GHz WiFi client connection and WPS. Only two buttons are given on the device, first is for WPS/ power on & off and the other one is for resetting the device.
Netgear EX7500 Setup Requirements
For the setup of the extender you need to fulfill the below given system requirements:
- You need a 2.4 GHz or 5 GHz 802.11 a/b/g/n/ac wireless router or gateway
- Furthermore a client device like computer/ laptop or mobile to access browser of your choice:
- Microsoft Internet Explorer® 8.0 or higher
- Firefox 2.0 or higher
- Safari 5.1 or higher
- Google Chrome 25.0 or higher
Netgear EX7500 Setup Step By Step
You can easily complete the configuration of your tri band mesh WiFi extender EX7500 with the below mentioned steps:
- To begin the process you have to unpack the device.
- Take the device out of the box very carefully and look for the placement of the device.
- You need to keep the device closer to the main router device.
- Proximity is mandatory for the setup of the device thereafter you can re-position it to optimize the performance.
- Plug-in the device in the power outlet and turn on the power.
Once the initial setup process completes you need to choose whether to opt for a WPS process or web based process. You can move ahead with any of the processes. Step by step guide for both the ways are provided here;
Web Process
Web based process may involve following steps to configure Netgear EX7500:
- Open a client device and go to the WiFi settings to connect it with the extender network.
- Once connection is done, go to the web browser of your choice to browse the login page.
- Search “http://www.mywifiext.net/” web address by typing in the URL bar.
- Thereafter, netgear installation assistant will guide you to move ahead.
- Create your account and choose setup new extender device link
- Select the mode in which you desire to configure the device and then follow the on screen instructions.
- Complete the setup process and then relocate your extender device.
- You can also test the new network by connecting a WiFi enabled device.
- Just simply connect to the network and use the internet from different locations.
In case you find a weak signal area even after successfully configuring the device, you need to reposition the extender. It shows the placement you opt for is not adequate. You need to keep the Netgear EX7500 Tri Band Mesh WiFi Range Extender device in the midway. Means within the range of the main host device but a little away from the current position. The new position should be in between the router placement and the area where signals are weak.
WPS Process
The WPS process for the Netgear EX7500 Setup is a more quick and easy method. You can complete the configuration and connect the device in your existing network with this way in a few minutes. Check out the below given process:
- Initially press the WPS button available on the side panel of the extender device.
- Thereafter press the WPS button of your home router device.
- This process must be complete within two minutes.
- Then wait and check the router link LED on the device.
- If the LED turns blue, the connection is successful.
- In case the LED turns red, move the device more close to the router and try again.
Once the connection completes successfully, you can relocate it for better performance.
