How Do I Setup My Netgear Wifi Extender Without WPS?
Wondering How Do I Setup My Netgear Wifi Extender Without WPS? If your router device doesn’t support WPS connection then you have reached the right page. Further we specify a step by step configuration process using which you can do the netgear wifi extender setup without WPS. This method is a Web based setup method. In this method you need a client device to open the web setup interface of the netgear. Check out the steps specified below to complete the configuration.
Place & Power The Extender
The first step of the setup process is placement of the netgear range extender device and powering it up. Without proper placement you can not move forward to complete and understand How Do I Setup My Netgear Wifi Extender Without WPS. find a location to put the device. Make sure to keep it proxy to your host router device.
Once the position is done, plug the extender into a power socket and ensure the Power LED lights up. Press the Power button manually, to start the device. Some models may show blinking LEDs during incipiency, which is fully normal. A stable Power LED indicates the extender is ready for the coming step. Make sure your router is working duly, as the extender relies entirely on the router’s internet connection.
Access Web Interface
If you’re wondering How Do I Setup My Netgear Wifi Extender Without WPS, the answer begins with accessing the web-based setup page. To access the configuration runner for the setup, connect your computer, smartphone, or tablet to the extender’s standard network. This WiFi network is generally labeled as NETGEAR_EXT and doesn’t bear a password originally. Open any web cybersurfer and enter http// mywifiext.net, http// 192.168.1.250 or http// mywifiext.local in the address bar. You will be diverted to the Netgear setup wizard. Enter admin as the username and password as the default password unless preliminarily changed, If a login prompt appears. Ensure your device is connected directly to the extender and not to the router or another network, If the runner doesn’t load.
Configure Settings
Once the setup wizard starts you should continue the Netgear WiFi extender setup by opting your WiFi network from the detected list. Enter your router’s WiFi word to allow the extender to sync. Next, you’ll be asked to assign a new name to the extended network. You may moreover keep the default name and customize password .
Finalize Setup & Test Network
Save your settings and stay for the extender to apply the configuration. The LEDs will blink during processing and ultimately show a solid connection index once the link to the router is established. After configuration you need to test the network for that disconnect your device from the setup network first. Now reconnect to the recently created extended WiFi name. Open a cybersurfer and try loading any website to confirm internet access. This confirms a successful Netgear WiFi extender setup.
Relocate Extender
For better performance you can move the range extender device to some other location. The extender should be kept half between your router and the area where you’re passing weak or no WiFi signals. Avoid placing it near thick walls, essence appliances, microwave oven ranges, or cordless phones, as these can intrude with wireless performance.
Connect Us
Still confused about How Do I Setup My Netgear Wifi Extender Without WPS? Even after reading the above description it is hard for you to proceed with the setup? If so then our expert support team is ready to help. With our support you can complete the setup effortlessly. Call or Message!
