Netgear EAX80 Setup: Quick And Simple Instructions

Netgear EAX80 Setup will give you a better networking experience. You can add this range extender device to get the best network coverage all over your home. Netgear EAX80 is a high performance WiFi 6 range extender. It receives signals from your host networking device and transmits them further to boost coverage. This device delivers fast, reliable internet across large homes and offices. You can easily set up this range extender device by following the easy guide given on this page. Check out the instructions and get a better network.

Install The Device

Netgear EAX80 Setup begins with the installation of the device hardware. You have to unbox the range extender device and then find a location close to your router device. After searching the location for initial setup you have to step further and power up the device. Plug the Netgear EAX80 into a power outlet and turn it on. This may take a minute or two. Once powered on, the extender is ready for configuration. You can initiate with the configuration steps specified further.

Configure The Device

Netgear EAX80 Setup can be done using WPS method and web based method. Both the configuration methods are easy. The WPS button based method is more simple as compared to the Web based setup. You can check out the setup process using both the method: 

WPS method 

The WPS method is the fastest way to connect the range Extender device with your router device. To proceed with this connection method you have to verify that your router supports WPS connection or not. If you are router support then you can proceed with the steps:

  • Hit the main router’s WPS button first.
  • Within 2 minutes push the Extender’s WPS button.
  • The extender will automatically connect to the existing network you just have to wait. 
  • Keep monitoring and when the process completes successfully the LED turns into a solid white colour. 

 In another case, if your router doesn’t support WPS connect then you should go with a web based set up. 

Web method 

Web based configuration is also very simple. You need to access the setup page using mywifiext.net web address in a smartphone or laptop with the help of a web browser. Before opening the web browser make sure your device is connected to the extender’s default network. Thereafter proceed with the instructions as per the screen. For the connection you have to select your existing WiFi network and enter it password. Save the changes and let the device connect. Once the changes has been applied your device is ready to use.

Connect us

In case you find it difficult to perform Netgear EAX80 Setup using any of the above methods or face difficulty then you can communicate with our experts for help. From our experts you will get a guide when you need it, we are available 24/7. You just need to give us a call on the below specified number and we will assist you with the setup process.